Enroll The Second Or Additional Fingerprints And Bound Code; Set/Change The First Code; Enroll The Second Or Additional Codes - Securam ScanLogic Audit Operating Instructions Manual

Note:
After Security Level is changed, the number of locks will not be changed.
When security level is changed, all fingerprints and codes will be deleted.
The code of ID No.01 will be 1234567890.
21. Enroll the first fingerprint and its bound code (Level 2)
In Security Level 2, the system will guide you through the fingerprint enrollment process
immediately followed by the code setting process.
Place your finger on the fingerprint reader window and hold.
The first fingerprint with an ID No. 01 is enrolled.
Enter a code (10 digits).
Enter the same code again.
When the screen shows "ID 01 Code Saved", the first fingerprint and its bound code with
ID No. 01 are enrolled successfully.
Note: The default password (1234567890) will be deleted automatically after the first
fingerprint and code are enrolled successfully.
22. Enroll the second or additional fingerprints and bound code (Level 2)
Unlock with an administrator's fingerprint and code .When the LCD screen shows "Select
Menu", press "▲" or "▼" to select Enroll New User.
Follow the same steps as to enroll the first administrator's fingerprint and code to
complete the enrollment.
23. Set/Change the first code (Level 1)
Unlock with the default code (1234567890). When the LCD screen shows "Select Menu",
Press "▲" or "▼" to select "Set/Change User Code", enter the 10-digit new code.
Note: Follow the same steps to change any valid code.
24. Enroll the second or additional codes (Level 1)
Unlock with the code of ID 01, When the LCD screen shows "Select Menu", press "▲" or
SECURAM Systems Inc. Page 14