Disable User Code; Disable User - Securam ScanLogic Audit Operating Instructions Manual


Press "Menu/Ok".
Enter a new code (10 digits).
Enter the same code again.

The LCD will display ID:03 Code Saved.

ID03 Code can now be used to unlock the safe lock system.
9. Disable User Code (Level 3)
This programming step is necessary to disable a User's code access. It does not delete the
User's enrolled fingerprint.

Unlock the system with an administrator's fingerprint (ID No. 01 or 02).

The LCD will display "Select Menu"

Press "▲" or "▼" to scroll to "Disable User Code"

Press "Menu/Ok".
Press "▲" or "▼" to select the user ID need to be disabled.
Press "Menu/Ok"
The code of ID No.3 is disabled.
Note: This function simply disables the user's code. It does not disable or delete the
enrolled fingerprint associated with this ID#. To delete a fingerprint see #17 – Delete
User.
10. Disable User (Level 3)
This programming step is necessary to disable a User's access rights both fingerprint and
code. It does not however delete the fingerprint or code but temporarily disables the
fingerprint and code. To delete a fingerprint see

Unlock the system with an administrator's fingerprint (ID No. 01 or 02).

The LCD will display "Select Menu"

Press "▲" or "▼" to scroll to "Disable User".
Press "▲" or "▼" to select the ID No. to disable (e.g. ID 03).
Press "Menu/OK".
SECURAM Systems Inc.
17. Delete User
Page 7