Delete All Users - Securam ScanLogic Audit Operating Instructions Manual

The first letter "x" is flashing. Press "▲" or "▼" to toggle this letter to "x". Press
"Menu/OK".
The second letter will flash. Press "▲" or "▼" to toggle this letter to "o". Press "Menu/OK".
Press "Menu/OK" twice to confirm the condition of Lock 3 and 4.
The authorization has been set successfully. Users with ID No. 03, 04 and 05 can open
only Lock 2.
17. Delete One User (Level 3)
Unlock with an administrator's fingerprint (ID No. 01 or 02). When the LCD screen shows
"Select Menu", press "▲" or "▼" to select "Delete One User".
Press "Menu/OK". Press "▲" or "▼" to select the ID No. to delete (e.g.
ID 03).
Press "Menu/OK".
Now No. 03 user is deleted.
18. Delete All Users (Level 3)
Unlock with an administrator's fingerprint (ID No. 01 or 02). When the LCD screen shows
"Select Menu", press "▲" or "▼" to select "Delete All Users".
Press "Menu/OK" again.
The EntryPad starts deleting users from ID No. 01 to ID No. 30.
▪▪▪▪▪▪
Note: After deleting all users, all the enrolled fingerprints and codes are deleted
completely.
The Administrators Code is reset to 1234567890
SECURAM Systems Inc. Page 12