Time Delay - Unlock With A User Code; View Audit Trail; Set Number Of Locks - Securam ScanLogic Audit Operating Instructions Manual

the EntryPad.

The LCD will display:

If an enrolled fingerprint is not presented and verified during the Time Window
period, the safe lock will remain locked. The Time Window will continue to
countdown and until the end, and then the LCD will show:
Note:
User ID01 and 02 are Time Delay Overide (TDO) codes. This means that these Users
can bypass or override any Time Delay settings, and the lock will open immediately..
14. Time Delay - Unlock with a User Code (Level 3)
Follow the same procedure as above, but instead of presenting an enrolled fingerprint
enter a valid User code. Remember to press the button marked "Code" to indicate that
you will be entering a code
15. To View the Audit Trail

Open the lock using the Admin fingerprint

When "Select Menu" appears,
 Press "Menu/OK".
 You can now view all 500 time/date stamped audit events on screen by scrolling
through the evenings using the Up or Down buttons.
15. Set number of locks (Level 3)
Unlock with an administrator's fingerprint (ID No. 01 or 02).When the LCD shows "Select
Menu", press "▲" or "▼" to select "Set number of locks".
Press "Menu/OK".
Enter Mfc. code. 9316961396
Press "▲" or "▼" to set number of locks.
SECURAM Systems Inc.
press "▲" or "▼" to "Show Audit Trail"
Page 10