Table of Contents
Advertisement
Maintenance
Cleaning
To clean the probe body, use a soft cloth dampened in a solution of
mild detergent and water. To clean the core, open the jaw and clean
the exposed core surfaces with a cotton swap dampened with
isopropyl alcohol (isopropanol) or ethyl alcohol (fotocol or ethanol).
Lubricate the jaws mating surfaces with a light oil.
Do not use chemicals containing benzine, benzene, toluene, xylene,
acetone, or similar solvents.
Do not immerse the probe in liquids or use abrasive cleaners.
Preparation for Shipment
If the original packaging is unfit for use or not available, use the
following packaging guidelines:
1. Use a corrugated cardboard shipping carton having inside
dimensions at least one inch greater than the probe dimensions.
The box should have a carton test strength of at least 200 pounds.
2. Put the probe into a plastic bag or wrap to protect it from
dampness.
3. Place the probe into the box and stabilize it with light packing
material.
4. Seal the carton with shipping tape.
A605 Instructions
6
Advertisement
Table of Contents
