8
Installing the Board in a PC
This section describes how to install the board in a PC.
To unpack the board
Remove the Md4/PCX board slowly from its package and
protective sleeve slowly to protect against static discharge
to the board.
Static electricity can damage the board. Wear an anti-static
wrist strap or touch one hand to a bare metal surface on
the power supply to discharge static electricity.
• While performing any part of the installation that
involves touching the board or parts of the motherboard,
keep one hand touching the metal surface to provide
grounding.
• If you can't perform a step with one hand, use both and
return one hand occasionally to the bare metal surface.
Chapter 2