Service Schedule - Tiger RBM16 Operator's Manual

SERVICE SCHEDULE

Every Day
 Grease machine fully prior to work (and prior to storage).
NOTE: New machines must be greased before initial use.
 Check for broken or damaged flails.
 Check tightness of flail nuts and bolts.
 Visually check for oil leaks and damaged hoses.
 Check all guards and safety shields are correctly fitted and undamaged.
 Ensure all lights are working and clean.
 Check oil level.
 Clean the cooler matrix, in dusty conditions more frequent cleaning is required.
After initial 12 Hours
 Change return line filter element. Failure to do so will invalidate the warranty.
Note; factory fitted filter elements are identified differently to replacement elements.
After initial 50 Hours
 Change gearbox oil.
Every 25 Hours
 Grease PTO Shaft universal joints and tubes.
Every Week
 Check tightness of all nuts and bolts.
 Check gearbox oil level.
Every 100 Hours
 Grease PTO shaft shield lubrication points.
Every 500 Hours
 Change return line filter element.
 Change gearbox oil.
 Check condition of hydraulic oil and change if required; when changing oil new
return line filter and suction strainer elements should be fitted and return line filter
changed again after 12 hours of work.
Annually
 Change tank breather.
PTO Shaft Lubrication
41