Cable Control Operation - Tiger RBM16 Operator's Manual

CABLE CONTROLS
Cable controlled machines are supplied with a control unit of the type shown below – the
particular version will be dependent on the specification and features of the machine.
Versions differ primarily in the number of armhead control levers assembled within the
control bank – some versions will have the rotor control lever assembled alongside the
armhead control levers as shown below left and others will be supplied with the rotor
control lever as a 'standalone' unit with its own individual mounting bracket.
The armhead control levers all move in a forwards and backwards direction each
controlling a specific arm function with the exception of the auto reset lever which operates
only in the backward direction; from the central 'off' position to the backwards 'on' position.
Where applicable, if a machine is fitted with the optional lift float feature, operation of the
lift float will be via an additional electrical switch which will need to be installed in a
convenient location in the tractor cab.
LOCATION & FUNCTION OF CONTROLS
1. Arm Lift Control
2. Arm Reach Control
3. Head Angle Control / Angle Float Selection
4. Arm Slew Control
5. Rotor Control
Cable Control Unit
23