Table of Contents
Advertisement
PRE-WORK PREPARATION & PRECAUTIONS
IMPORTANT: Always read the book first before attempting to operate the machine –
practise operating the machine, without the rotor running, in a safe open space until you
are fully familiar with all controls and functions of the machine. Only begin using the
machine for work when you are confident that you have mastered the controls and
operation sufficient for safe use of the machine.
CAUTION: Care must always be taken when working with the flailhead close in to
avoid contact with the tractor.
Pre-work Machine Checks
Prior to use of the machine always check all bolts are tight and that the torque figures are
correct for the specific locations indicated below:
39ft.lbs
150ft.lbs
General Work Precautions
Inspect the work area prior to operation, remove any hazardous materials and note any
immovable objects - it may also be a wise precaution to mark immovable hidden hazards
with a visible marker that can easily be seen from the operating position in the tractor.
If the type of work being undertaken makes this important precaution impractical, always
maintain a high degree of alertness and restrict the tractors forward motion to a speed that
allows sufficient time to stop the tractor or avoid the hazard before contact is made.
General Working Practice
It is the operator's responsibility to develop safe working procedures;
Always:
▲
Be aware of potential hazards in the vicinity of the work area.
▲
Ensure all guards are fitted correctly and in good condition.
▲
Disengage PTO before stopping the engine.
▲
Wait until the flail has stopped running before leaving the tractor seat.
▲
Disengage the PTO, stop the engine, remove and pocket the key before making any
adjustments to the machine.
▲
Check frequently that all nuts and bolts are tight.
▲
Keep bystanders at a safe distance.
Motor Bolts
Rotor Bolts
Roller End Capscrews
Flail Bolts
Roller Bracket Bolts
20
Advertisement
Table of Contents
