Tiger RBM16 Operator's Manual page 38

TRANSPORT POSITION
The machine is transported inline to the rear of the tractor with a minimum of 12" (300mm)
clearance between the tension link and the rear cross member of the tractor cab.
Transport Position with Flailhead Attached
12" minimum 12" minimum
Transport Position with Flailhead Removed
For transportation without a flailhead attached, the machines arms must be fully folded and
the lift ram fully retracted so the mass of the arms is behind the centre line – If the lift ram
was extended the weight of the arms would be in front of the centre line which would result
in the balance of the machine going 'over centre' causing the tension link to crash into the
rear cross member of the tractor's cab.
WARNING: During transport the 'SLEW' mode must ALWAYS be selected on the controls.
31