Philips LC7.2HU Service Manual page 9

4.3.3 IR/LED Panel
1. Refer to next figure.
2. Unplug connector(s) [1].
3. Release clip [2] and remove the board.
When defective, replace the whole unit.
1
Figure 4-4 IR/LED panel
4.3.4 Speakers
Mid-range Speakers
1. Refer to next figure.
2. Unplug connectors [1].
3. Remove screws [2].
2 1
Figure 4-5 Mid-range speakers
Tweeters
1. Refer to next figure.
2. Unplug connectors [1].
3. Remove screws [2].
2 1
Figure 4-6 Tweeters
4.3.5 i-Board
1. Refer to next figure.
2. Disconnect all cables from the i-Board.
3. Remove the fixation screws [1].
4. Take out the i-Board.
Mechanical Instructions
2
G_16850_009.eps
110107
2
G_16850_010.eps
110107
G_16850_011.eps
110107
LC7.2HU LB
Figure 4-7 i-Board
4.3.6 Integrated Card Slot (if present)
1. Refer to next figure.
2. Disconnect all cables [1] from the board.
3. Remove the fixation screws [2].
4. Take out the module.
2
H_16990_032.eps
Figure 4-8 Integrated Card Slot
4. EN 9
2 1
H_16990_031.eps
270707
1
270707