Table of Contents
Advertisement
4.3.10 LCD Panel
1. Refer to next figure(s).
2. Unplug the connectors on the Main Supply Panel, the LED
& IR board and the connectors from the loudspeakers [1].
3. Do NOT forget to unplug the LVDS connector [2] from the
SSB. Important: Be careful, as this is a fragile connector!
4. Remove the screw that holds the Side I/O module bracket.
Figure 4-13 LCD panel 32" [2/2]
4
1
4
1
Figure 4-12 LCD panel [1/2]
7
G_16850_015.eps
Mechanical Instructions
5. Remove screws[3] of the central sub-frame.
6. Remove LCD panel fixation screws [4] and lift the complete
central sub-frame from the set (incl. the PSU, SSB, and
Side I/O boards and wiring).
7. Lift the LCD panel [7] from the front cabinet.
3
2
3
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position. See figure "Cable
dressing".
•
Pay special attention not to damage the EMC foams.
Ensure that EMC foams are mounted correctly (one is
located above the LVDS connector on the display, between
the LCD display and the metal sub-frame).
110107
LC7.2HU LB
4.
4
4
1
H_16990_029.eps
EN 11
270707
Advertisement
Table of Contents
