Programming Cook Times - MTI AUTOFRY -10X Operator's Manual

Programming
Entering the programming mode:
1. Press POWER to turn the AutoFry off.
2. Press the 2 and 0 together.
PASSWORD FOR ALL PROGRAMMING: 2,2,2 & START
The following parameters can now be accessed:
Presets:
The presets let you program up to 18 preset cook cycles. It is a good idea to write down your most
commonly used cook times prior to programming the AutoFry.
Press 1 to enter the presets. The following will appear:
Preset 0 is the manual cook cycle and will show the last cook time manually entered. Only the
temperature compensation and the basket shake features can be changed in preset 0.
Use the ARROWS to move through presets 1 through 18. The presets allow you to enter a
product name, a cook time, edit the temperature compensation and the basket shake feature.
To change parameters, do the following:
To change text:

Press 1 to edit the preset name.

Press the ARROWS to position the cursor.

Press the 1 or 2 key to change the character.

Press CLEAR to blank out a character and
advance to the next position.

Press START to save the changes.
To change comp:

Press 3 to edit comp.

Press any digit to change the value from Yes
to No.

Press START to save the changes.
MTI-10X / XL / XL-3 OM 10/16 Rev C
AutoFry
MTI-10X / XL / XL-3 Operator's Manual
15
63-0007C
To change time:

Press 2 to edit the preset time.

Press CLEAR to zero the values.

Enter desired time.

Press START to save the changes.
To change shake:

Press 4 to edit the shake feature.

To turn off, press CLEAR then START.

To turn on, press CLEAR then enter
:15 or :30 seconds.

Press START to save the changes.