Operation - EGO POWER Z6ZTR Operator's Manual

ADJUSTMENT
EN
BEFORE ADJUSTMENT (Fig. D1)
ADJUSTING THE CUTTING-DECK HEIGHT (Fig. D2)
ADJUSTING THE ANTI-SCALP WHEELS (Fig. D3 – D6)
ADJUSTING THE SEAT (Fig. D7)
ADJUSTING THE STEERING WHEEL (Fig. D8)

OPERATION

BEFORE OPERATION (Fig. E1)
SETTING THE PARKING BRAKE (Fig. E2)
NOTICE:: Never depress the parking-brake pedal to slow down the speed. Once the parking-brake pedal is
depressed enough but not to the full parking position, the mower will stop moving on a flat surface, but if this
happens on a slope, the mower may slide down the slope.
ATTACHING / DETACHING THE BATTERY PACK (Fig. E3 – E6)
In order to start this mower, EGO batteries totaling 15 Ah (2 X BA4200/BA4200T) or more are required. For best
performance, we recommended use of EGO batteries that total 30 Ah or more.
CHARGING THE MOWER
Use only with the recommended battery packs and chargers.
◾
Charge the battery pack(s) separately (Fig. E7)
NOTICE: Refer to corresponding battery and charger manuals for detail instructions.
◾
Charge the battery pack(s) via charging port (Fig. E8-E10)
TESTING THE SAFETY INTERLOCK SYSTEM
a. To test the deck-blade system (Fig. E11 – E12)
b. To test the driving system (Fig. E13 – E14)
If the deck-blade system and/or the driving system fails to stop when the operator is off of the seat and if the cause
cannot be determined after confirming the plug and socket connection of the seat is well connected, contact your
EGO customer service center immediately.
CHECKLIST BEFORE OPERATION
◾
Ensure that the work area is clear of children, bystanders, and pets.
◾
Clear the work area of objects that may be thrown by the mower blades.
◾
Clean debris from the mower.
◾
Check for loose fasteners.
◾
Check to make sure that all guards are in place and working properly.
◾
Visually check the tires whether they are inflated.
30
ZERO TURN RIDING MOWER — ZT4200E-S