Using Usb Connections - Planar Dome Q2 Reference Manual

QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Q2 Display
Check Package Contents
Identify Components
Position the Display
Desk Stand Features
INSTALLING THE DISPLAY
Install AX1 Controller
Connect Cables
Install Display Driver
Adjust Display Properties
OPERATING THE DISPLAY
Front-Panel Controls
Screen Adjustments
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
USB Connections
Power Management System
Driver Removal

Using USB Connections

Both the Q2 display and the desk stand have an integrated self-powered USB hub
that allows you to attach USB devices (such as a keyboard or mouse) to your display
rather than to your computer.
To use the USB ports
1 Use the USB cable to connect the upstream port on the display or desk stand
to the downstream port on your USB-compliant computer or other hub.
2 Connect your USB-compliant peripherals to the downstream ports on
the display or the desk stand.
See the back panel, side panel, and
USB specification for more information.
B
A
Display, back
Dome Q2 Display
desk stand for another view. See the
B
A
Desk stand, bottom
Display, side
USB tips
To activate the USB hub function,
the display must be connected to a
USB-compliant computer or another
hub with the USB cable.
Even if the display is in power-saving
mode, the USB devices function
when they are connected to the
USB ports (both the upstream and
downstream) of the display.
Legend
USB A (downstream) port
A
USB B (upstream) port
B
A
25