Alarm - Panasonic KX-TGE633 Operating Instructions Manual

*7 This setting is available when you have the key detector (KX-TGA20). Read the installation
manual for more information on the key detector.
*8 For models with supplied key detectors, the display shows "1: Detector1".
*9 If you register 2 or more key detectors.
*10 If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*11 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary. The setting should stay at "700 ms" unless pressing MFLASHN fails to
pick up the waiting call.
*12 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to "A" if telephone line condition is not good.

Alarm

An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit's date and time setting
is correct (page 14).
1
MMENUN#720
2
MbN: Select the desired alarm. a
MSELECTN
3
MbN: Select the desired alarm option. a
MSELECTN
"Off"
Turns alarm off. Go to step 10.
"Once"
An alarm sounds once at the set time.
"Daily"
An alarm sounds daily at the set time.
Go to step 5.
"Weekly"
Alarm sounds weekly at the set time(s).
For assistance, please visit http://shop.panasonic.com/support
KX-TGE63x_64xUSA_(en)_1213_ver031.pdf 37
4
Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired month and date. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press MSELECTN. a MOKN
5
Set the desired time.
6
*: Select "AM" or "PM". a MOKN
7
Enter a text memo (10 characters max.).
a MOKN
8
MbN: Select the desired alarm tone. a
MSELECTN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
9
MbN: Select the desired snooze setting.
a MSAVEN
10
MSELECTN a MOFFN
Note:
R Press MSTOPN to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or MSNOOZEN to stop
the sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Programming
37
13/12/2017 4:29:18 PM