Table of Contents
Advertisement
Programming
*1
If you program these settings using one of the units, you do not need to program the same
item using another unit.
*2
This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3
When the Bluetooth feature for handset is turned off, these menus are not displayed
(page 16).
*4
After the Bluetooth headphone is paired, the headphone name is displayed.
*5
For Headphone 1.
*6
For Headphone 2.
*7
For Headphone 3.
*8
For Headphone 4.
*9
To use this feature, set the date and time first (page 14).
This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received. (Caller ID subscribers only)
To turn this feature on, select "Caller ID auto".
To turn this feature off, select "Manual".
*10 The preset melodies in this product ("Melody 1" - "Melody 10") are used with permission
of © 2009 - 2012 Copyrights Vision Inc.
*11 If you subscribe to a distinctive ring service, select a tone (tone 1 to 5). If you select a
melody, you cannot distinguish lines by their ringers.
*12 If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*13 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*14 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to "A" if telephone line condition is not good.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit's date and time setting
is correct (page 14).
1
MMENUN#720
2
MbN: Select the desired alarm. a
MSELECTN
40
For assistance, visit www.panasonic.ca/english/support
3
MbN: Select the desired alarm option. a
MSELECTN
"Off"
Turns alarm off. Go to step 10.
"Once"
An alarm sounds once at the set time.
"Daily"
An alarm sounds daily at the set time.
Go to step 5.
"Weekly"
Alarm sounds weekly at the set time(s).
Advertisement
Table of Contents
