Table of Contents
Advertisement
*2
If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*3
This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID". To turn this feature off, select "Manual".
(Caller ID subscribers only)
To use this feature, set the date and time first (page 12).
*4
When this feature is set to off, the handset number is displayed.
*5
Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys.
*6
If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*7
The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*8
Although the handset displays these items, these features are not available for this model.
*9
This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). Alarm can be programmed
for each handset. You can set one of 2
different alarm options (once or daily).
Important:
R Make sure the unit's date and time setting
is correct (page 12).
1
M
N#720
2
MbN: Select the desired alarm option. a
M
N
"Off"
Turns alarm off. Go to step 7.
"Once"
An alarm sounds once at the set time.
"Daily"
An alarm sounds daily at the set time.
Go to step 4.
3
Enter the desired date and month. a
M
N
4
Set the desired time. a M
5
MbN: Select the desired alarm tone. a
M
R We recommend selecting a different
ringer tone from the one used for
outside calls.
6
MbN: Select the desired snooze setting.
a M
7
M
Note:
R Press MeN to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key from 0 to 9, *, or #
to stop the sound but keep set time and/or
the snooze function activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
N
Programming
N
N
N a MeN
19
Advertisement
Table of Contents
