4 -3 . Do-it -yourse lf m a int e na nc e
Che ck ing a nd re pla c ing fuse s
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Turn the engine switch OFF.
STEP
1
Open the fuse box cover.
STEP
2
Engine compartment
Under the driver's side instrument panel
After a system failure, see "Fuse layout and amperage rat-
STEP
3
ings" (→P. 326) for details about which fuse to check.
Push the tab in and lift the lid
off.
Remove the lid.
4
323