Table of Contents
Advertisement
Turning off TRAC and VSC
n
Automatic reactivation of TRAC and VSC
n
Turning the engine switch OFF after turning off the TRAC and VSC systems
will automatically re-enable them.
n
Automatic TRAC reactivation
If only the TRAC system is turned off, the TRAC system will turn on when
vehicle speed increases.
Automatic TRAC and VSC reactivation
n
If the TRAC and VSC systems are turned off, the systems will not turn on
even when vehicle speed increases.
Sounds and vibrations caused by ABS, brake assist, VSC and TRAC
n
A sound may be heard from the engine compartment when the engine is
l
started or just after the vehicle begins to move. This sound does not indi-
cate that a malfunction has occurred in any of these systems.
Any of the following conditions may occur when the above systems are
l
operating. None of these indicates that a malfunction has occurred.
• Vibrations may be felt through the vehicle body and steering.
• A motor sound may be heard after the vehicle comes to a stop.
• The brake pedal may pulsate slightly after ABS is activated.
• The brake pedal may move down slightly after ABS is activated.
If the "VSC OFF" indicator light flashes
n
There is a malfunction in the TRAC and VSC systems. Contact your Toyota
dealer and have your Toyota inspected.
2-4. Using other driving systems
Push and hold the button while
the vehicle is stopped to turn off
TRAC and VSC.
The slip indicator light and "VSC
OFF" indicator light should come
on.
Push the button again to turn the
system back on.
2
137
Advertisement
Chapters
Table of Contents
