LASA TRENDY Series Installation, Use And Maintenance Manual page 35

Table of Contents

Advertisement

Available languages

Available languages

All manuals and user guides at all-guides.com
MANUALE DI INSTALLAZIONE, USO E MANUTENZIONE
INSTALLATION, USE AND MAINTENANCE MANUAL
STARTING
Before starting, check that the network is electrified and that water is supplied.
The following operations are necessary before starting the appliance:
- Insert the tank overflow pipe.
- Install pump filters.
- Open the main water supply tap.
- Turn on the master power switch.
- Rotate D knob to F position (A green lamp will light, showing that the appliance is powe-
red and carrying out a water loading/heating cycle).
When tank water reaches the set temperature (55°C), B green lamp will light, showing that
the appliance is ready for a washing cycle.
- Introduce the detergent into the tank (see the "Introduction of detergent" chapter)
- Introduce rinse aid or check its level (see the "Rinse aid dispenser" chapter).
After performing these operations, the basket can be inserted and a normal washing cycle
can start.
I
NTRODUCTION OF DETERGENT
Manual :
Use non-foaming industrial detergent. It has to be poured directly into the washing tank
when optimal temperature has been reached (it is advisable to dilute the detergent in advan-
ce with little water in a separate container). The quantity of detergent vary according to the
kind of dirt and the hardness of water, and it is conveniently suggested by detergent sup-
pliers.
Automatic :
The appliance is designed to host an automatic dispenser of liquid tank detergent, which
can be set after installation according to water hardness and the kind of detergent (to be
requested directly to the supplier of detergents).
R
-
INSE
AID DISPENSER
The rinse aid dispenser is located in the lower part of the appliance. It can be reached by
removing the front panel (under the door), after disconnecting the power supply.
- Before starting the appliance, make sure that the intake pipe is placed inside the rinse aid
reservoir.
- Fill the rinse aid reservoir, which is located inside the appliance if it is supplied with the
appliance, or externally if it is not supplied.
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents