ICON Health & Fitness PRO-FORM POWER 995i User Manual page 26

HOW TO USE THE SOUND SYSTEM WITH A
BLUETOOTH DEVICE
1. Place or hold your Bluetooth-enabled device
near the console.
2. Turn on your device's Bluetooth setting.
3. Pair your device to the console.
Press and hold the Bluetooth button on the con-
sole's speaker grill for 3 seconds. The Bluetooth
speakers will enter pairing mode. When your
device and the console pair successfully, the audio
from your device will play through the console's
speakers.
Note: The console can save eight devices in its
memory. If you have previously paired your device
to the console, you can simply press the Bluetooth
button to connect your device to the console.
4. Erase the console's device memory if
necessary.
If you need to erase all the Bluetooth-enabled
devices saved in the console's memory, press and
hold the Bluetooth button for 10 seconds.
HOW TO USE THE SOUND SYSTEM WITH AN
AUDIO CABLE
To play music or audio books through the console
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the jack
on the console and into a jack on your personal audio
player; make sure that the audio cable is fully
plugged in. Note: To purchase an audio cable, see
your local electronics store.
Next, press the play but-
ton on your personal audio
player. Adjust the volume
level using the volume
increase and decrease
buttons on the console or
the volume control on your personal audio player.
HOW TO USE THE TABLET HOLDER
IMPORTANT: The tablet holder (H) is designed
for use with most full-size tablets. Do not place
any other electronic device or object in the tablet
holder.
To insert a tablet into the tablet holder (H), set the
bottom edge of the tablet in the tray. Then, pull the clip
over the top edge of the tablet. Make sure that the
tablet is firmly secured in the tablet holder. Reverse
these actions to remove the tablet from the tablet
holder.
26
H