ICON Health & Fitness PRO-FORM POWER 995i User Manual page 16

16. Firmly tighten the four 3/8" x 2 1/4" Screws
(7) and the two 3/8" x 1 1/4" Screws (63).
Next, tighten the two 3/8" x 1 3/4" Screws
(62); the Wheels (97) must turn freely.
Next, set the Left Inner Base Cover (50) onto the
lower end of the Left Upright (89). Then, slide
the Left Base Cover (82) downward and press it
onto the Left Inner Base Cover.
Next, set the Right Inner Base Cover (96) onto
the lower end of the Right Upright (90). Then,
slide the Right Base Cover (83) downward and
press it onto the Right Inner Base Cover.
17. Press the two tabs (not shown) on the Tablet
Holder (105) into the slots (L) in the console
assembly (F).
Then, attach the Tablet Holder (105) with four
M4 x 16mm Machine Screws (26). Start all four
Screws before tightening them. Do not over-
tighten the Machine Screws.
IMPORTANT: The Tablet Holder (105) is
designed for use with most full-size tablets.
Do not place any other electronic device or
object in the Tablet Holder.
16
90
83
62
63
7
97
17
26
16
89
82
50
63
7
62 97
96
105
26
F
L