ICON Health & Fitness PRO-FORM POWER 995i User Manual page 13

10. IMPORTANT: To avoid damaging the Pulse
Crossbar Bottom (95), do not use power
tools and do not overtighten the #10 x 3/4"
Screws (9).
Attach the Pulse Crossbar Bottom (95) to the
Handrails (86, 87) with four #10 x 3/4" Screws
(9) and four #10 Star Washers (5); start all four
Screws, and then tighten them.
11. Identify the Right Handrail Cover (92). Set the
Right Handrail Cover on the Right Handrail (87).
Start two #8 x 3/4" Truss Head Screws (23) into
the bottom of the Handrail Cover; do not fully
tighten the Truss Head Screws.
Next, slide the Right Handrail Cover (92) for-
ward until it rests against the console assembly
(F). Then, tighten the two #8 x 3/4" Truss Head
Screws (23); do not overtighten the Truss
Head Screws.
Then, attach the Right Bottom Handrail Cover
(84) with three #8 x 3/4" Truss Head Screws
(23); start all three Screws, and then tighten
them.
Attach the Left Handrail Cover (79) and the
Left Bottom Handrail Cover (85) in the same
way.
10
9
5
95
86
11
79
23
23
85
23
13
9
5
87
F
92
23
87
23
84
23