Table of Contents
Advertisement
Quick Links
With Universal Dock for iPod
®
www.proform.com
USER'S MANUAL
Model No. PFTL99908.1
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete cus-
tomer satisfaction. If you have
questions, or if parts are missing,
DO NOT CONTACT THE STORE;
please contact Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
1-888-533-1333
CALL TOLL-FREE:
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.proformservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Advertisement
Table of Contents
Related Manuals for ICON Health & Fitness PFTL99908.1
Summary of Contents for ICON Health & Fitness PFTL99908.1
- Page 1 With Universal Dock for iPod ® www.proform.com USER'S MANUAL Model No. PFTL99908.1 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete cus- tomer satisfaction. If you have questions, or if parts are missing, DO NOT CONTACT THE STORE;...
-
Page 2: Table Of Contents
TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. .2 IMPORTANT PRECAUTIONS . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product. - Page 4 20. Never leave the treadmill unattended while it 24. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. DANGER: the power cord, and switch the reset/off cir- cuit breaker to the off position when the Always unplug the power treadmill is not in use.
-
Page 5: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM ual. To help us assist you, note the product model ® 980 CS treadmill with Universal Dock for iPod . The number and serial number before contacting us. The ® 980 CS treadmill with Universal Dock for iPod offers an model number and the location of the serial number impressive selection of features designed to make... -
Page 6: Assembly
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. - Page 7 1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip Hole the treadmill onto its left side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Cut the ties securing the Upright Wire (38) to the Base (83).
- Page 8 4. Hold a Bolt Spacer (77) inside the lower end of the Right Upright (78). Next, insert a 3/8" x 4 1/2" Bolt (6) with a 3/8" Star Washer (9) into the Right Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (77), 3/8"...
- Page 9 7. Set the console assembly face down on a soft surface to avoid scratching the console assem- Console bly. Wire Hole Hold the Right Handrail (95) near the console assembly. Next, insert the console wire into the large hole in the Right Handrail and out of the top as shown.
- Page 10 10. Attach the console assembly with six 5/16” x 1 1/2” Bolts (7) and six 5/16" Star Washers (10) (only three are shown). Console See steps 4 and 6. Tighten the 3/8" x 4 1/2" Assembly Bolts (6). 11. Raise the Frame (56) to the position shown. Have a second person hold the Frame until this step is completed.
- Page 11 12. Press the Left Accessory Tray (99) and the Right Accessory Tray (106) into the Console Base (91). 13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill.
-
Page 12: Operation And Adjustment
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, Your treadmill features a walking belt coated with high- performance lubricant. - Page 13 CONSOLE DIAGRAM Navigation Buttons Clip FEATURES OF THE CONSOLE to accept iFit Interactive Workout Cards containing workouts designed to help you achieve specific fitness The revolutionary treadmill console offers a selection goals. For example, lose unwanted pounds with the 8- of features designed to make your workouts more ef- week Weight Loss workout, or train for a long-distance fective and enjoyable.
- Page 14 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left.
- Page 15 6. Follow your progress with the display. 7. Measure your heart rate if desired. The console offers several display options. The dis- If you hold the handgrip pulse sensor and wear the play option you select will determine which workout optional chest pulse sensor at the same time, the information is shown.
- Page 16 HOW TO USE A WEIGHT LOSS WORKOUT OR A sents the current segment of the program. The PERFORMANCE WORKOUT height of the flashing segment indicates the speed setting for the current segment. At the end of each 1. Insert the key into the console. segment, a series of tones will sound and the next segment of the profile will begin to flash and the See HOW TO TURN ON THE POWER on page...
- Page 17 HOW TO USE AN IFIT CARD and incline settings of the workout. Hold the handrails and begin walking. 1. Insert the key into the console. During the workout, a personal trainer will guide you See HOW TO TURN ON THE POWER on page through the workout.
- Page 18 HOW TO USE THE IFIT COMPETITION TRAINING select a profile of the incline settings of the race CENTER (see page 20). 1. Insert the key into the console. After a few moments, READY, SET, GO will ap- pear in the display and then the race will begin. See HOW TO TURN ON THE POWER on page Hold the handrails and begin walking.
- Page 19 • The speed of the walking belt. Note: Press the • The bank, or amount, of energy your opponents Enter button to see your pace in minutes per kilo- have left. As the amount of energy in a bank de- meter or minutes per mile.
- Page 20 HOW TO PERSONALIZE CONSOLE SETTINGS workout. If you change the maximum incline set- ting, the intensity of the entire workout will change. 1. Insert the key into the console. Choose the AUTO incline mode to use preset in- cline settings, the FLAT incline mode to use no in- See HOW TO TURN ON THE POWER on page cline settings, or the CHOICE incline mode to choose a profile of the incline settings at the begin-...
- Page 21 HOW TO VIEW THE FITNESS JOURNAL change the year. Note: The fitness journal can store information for 7 different years. You can only 1. Insert the key into the console. view a year for which information has been recorded. See HOW TO TURN ON THE POWER on page 4.
- Page 22 THE INFORMATION MODE HOW TO USE THE STEREO SOUND SYSTEM The console features an information mode that allows This product has been designed specifically to work you to select a unit of measurement for the console with iPod and has been certified by the developer to and turn on or turn off the display demo mode.
- Page 23 THE OPTIONAL CHEST PULSE SENSOR HOW TO ADJUST THE CUSHIONING SYSTEM Remove the key from the console and unplug the An optional chest pulse sensor offers hands-free oper- power cord. The treadmill features a cushioning sys- ation as it tracks your heart rate during your workouts. To purchase the optional chest pulse sensor, call tem that reduces the impact as you walk or run on the the telephone number on the front cover of this...
-
Page 24: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. - Page 25 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Frame Pull the latch knob to the left and hold it. It may be neces- sary to push the frame forward as you pull the knob to the left.
-
Page 26: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. - Page 27 Remove the three #8 x 3/4" Screws (1) and care- fully pivot the Hood (61) off. Locate the Reed Switch (71) and the Magnet (50) on the left side of the Pulley (51). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and 1/8 in.
- Page 28 PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left rear roller bolt clockwise 1/2 of a turn;...
-
Page 29: Exercise Guidelines
EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 30: Part List
PART LIST—Model No. PFTL99908.1 R1008A To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. Description Key No. Qty. Description #8 x 3/4" Screw Front Roller/Pulley #8 x 1" Tek Screw 15 1/2"... - Page 31 Key No. Qty. Description Key No. Qty. Description Console Ground Wire – 4" Black Wire, M/F #8 x 2" Screw – 4" White Wire, M/F 5/32" Hex Key – Userʼs Manual Lift Motor Spacer *These parts are not illustrated. Latch Endcap Specifications are subject to change without notice.
-
Page 32: Exploded Drawing
EXPLODED DRAWING A—Model No. PFTL99908.1 R1008A... - Page 33 EXPLODED DRAWING B—Model No. PFTL99908.1 R1008A...
- Page 34 EXPLODED DRAWING C—Model No. PFTL99908.1 R1008A...
- Page 35 EXPLODED DRAWING D—Model No. PFTL99908.1 R1008A...
-
Page 36: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...