Before You Begin; Safety Precaution - Planar Dome C3i Quick Reference Manual

Before You Begin

Experienced users and system administrators can follow the instructions in this
document to install a Dome display and Dome DX2 video controller on Solaris
systems. Check the safety precaution below.
Make sure that your display is one of these Planar models and that your system
meets these requirements.
Display Display Controller System Requirements
Dome C3i Dome DX2
Dome E2
Dome E3
Dome E3c
Dome E5
Moving from Dome C3i to Dome EX Display System
When you upgrade from a Dome C3i to a Dome EX display system, you need to
update the fi rmware on the Dome DX2 board already installed in your computer
system. Install the new driver on the existing Dome C3i display system fi rst.
The fi rmware is updated automatically. Then replace the Dome C3i display with
the Dome EX display.

Safety precaution

Wear an antistatic heel or wrist strap
when installing the board to avoid
damage to computer components.
2
• PCI slot per board
• 2 MB hard disk space for
installation of driver, DDX, and
documentation.
• CD-ROM drive
Warning
Avertissement
Operating System
Solaris 2.5.1 to 10
Avvertenza
Warnung
Advertencia