Before You Begin; Unpacking The Display - Planar Dome C3i Quick Reference

Before You Begin

Check that your system meets these requirements and
runs one of these Microsoft operating systems.
System Requirements Operating System
• •
PCI slot per board Windows XP
•
•
50 MB hard disk space Windows 2000
•
256 MB RAM
•
CD-ROM drive
Increasing the PCI Bus Performance
(PCICacheMode registry entry)
On systems with 64-bit PCI slots, use the DX2 driver to
enable write-combining for the DX2 display controller.
Enabling this function can improve video performance
on the board by 100% or more. The results: faster image
loads, increased window and level speed, and enhanced
system performance.
For more information, visit www.planar.com.
2
Warning
Avertissement
Avvertenza
Advertencia
Warnung
Wear an antistatic heel or
wrist strap when installing
the controller and display to
avoid damage to computer
components.
1

Unpacking the Display

Check the contents of your Dome C3i display package for all the items shown here.
Save the original packing materials for storage and shipping.
Dome C3i digital flat panel
Dome DX2 display controller
Dome C3i
C3i power block quick reference
Power cord DVI to DVI video cable
Guidelines
•
Use both hands to lift
or adjust the display.
•
Avoid touching the
display screen.
•
Do not set up the display
in areas with sudden
temperature changes
and strong light sources.
•
Do not block the vents on
the back of the display.
•
Do not remove the back
cover or disassemble
the display.
Dome CXtra CD and
driver software
3