High Speed - Graco TurfLiner 826059 Operation

5 Adjust idle adjustment
screw until RPM is 4400 to
4600
Hint: pump starts to cycle
38

High Speed

6 Turn prime valve horizontal
(pump stalls). Pump must
contain fluid (water/paint)
and be primed.
7 Set Throttle Override:
Lift stencil plate up and
rotate right.
Repair
A
B
8 Adjust idle adjustment
screw until RPM is 5700 to
5900
Increase RPM: Loosen
front nut (A) and tighten
rear nut (B).
Decrease RPM: Loosen
rear nut and tighten front
nut.
310928A