Epson WF-3620 Series User Manual page 140

User's Guide
Items
Sender's Email Address
SMTP Server Address
SMTP Server Port Number
POP3 Server Address
POP3 Server Port Number
F
Press OK.
G
Select Connection Check to check that the product is connected to the email server.
Note:
❏ If an error message is displayed, check if the email server settings are correct.
❏ When you cannot send an email even if the connection check succeeds, check the authentication method for the
email server you are using.
Maintaining Your Product and Software
Explanations
Specify the email address that the product uses to send emails. You
can specify the existing email address. To make it clear that the
email is being sent from the product, you can acquire an address
specifically for the product and enter it here.
Enter the server address of the server that sends the email (SMTP
server).
Enter the port number of the server that sends the email (SMTP
server).
If you select POP Before SMTP as the Authentication Method, enter
the server address of the server that receives the email (POP3
server).
If you select POP Before SMTP as the Authentication Method, enter
the port number of the email server that receives the email (POP3
server).
140