Cleaning The Appliance; Cleaning The Exterior; Cleaning The Particles Sensor; Maintaining The Filter - LG PuriCare 360 Clean Booster Pet Owner's Manual

3
Package the appliance to prevent the dust or
foreign substance from entering the appliance.
Store the packaged appliance at a shaded
place.
CAUTION
• Do not store the appliance at a humid place or at
a place exposed to the direct sunlight.
Otherwise the appliance may be deformed,
malfunction or generate odor.

Cleaning the Appliance

Cleaning the exterior

1
Remove dust from the air inlet and outlet using
a vacuum cleaner.
2
Wipe the exterior with a soft lint-free cloth.
CAUTION
• Do not wipe the appliance with an alkaline
detergent.
• Never use sulphuric acid, hydrochloric acid or
organic solvent (e.g., thinner, kerosene and
acetone) to wipe the appliance exterior, or affix
labels on the exterior. Doing so may damage the
product surface.
• Care should be exercised to prevent flowing of
water into the product.
NOTE
• If dust on the front and rear covers cannot be
removed, disassemble the covers and clean
them with water. After cleaning, dry the covers
thoroughly in the shade.

Cleaning the Particles Sensor

PM1.0 (ultra-fine particles) sensor detects fine
particles as well as coarse particles. Therefore, you
need to clean its lens regularly.
1
Separate the rear cover of the product.
2
Open the sensor cover.
3
Clean the lens with a cotton swab soaked with
water and clean it again with a dry cotton swab.
NOTE
• Do not wipe the sensor with any substances
other than water. It may cause a appliance to
malfunction.

Maintaining the Filter

Cleaning the Filters

1
Separate the cover of the product.
2
Remove particles off of the ultra-fine filter with
a vacuum cleaner or a soft brush.
MAINTENANCE
29