Storage
If the appliance is not used for a long period of
time, store it at a shaded and dry place.
1
Operate the product for one hour or more on
a fine day.
• This removes the moisture and prevents
molds from building up inside the product.
2
Turn off the power and unplug it from the
electrical outlet.
• Wind the power cord around the bottom of
the appliance.
3
Package the appliance to prevent the dust or
foreign substance from entering the appliance.
Store the packaged appliance at a shaded
place.
CAUTION
• Do not store the appliance at a humid place
or at a place exposed to the direct sunlight.
Otherwise the appliance may be deformed,
malfunction or generate odor.
Cleaning the Appliance
Cleaning the exterior
1
Remove dust from the air inlet and the outlet
using a vacuum cleaner.
2
Wipe the exterior with a soft lint-free cloth.
CAUTION
• Do not wipe the appliance with an alkaline
detergent.
• Never use sulphuric acid, hydrochloric acid or
organic solvent (e.g., thinner, kerosene and
acetone) to wipe the appliance exterior, or affix
labels on the exterior. Doing so may damage
the product surface.
• Care should be exercised to prevent flowing of
water into the product.
26
NOTE
• If dust on the front and rear covers cannot be
removed, disassemble the covers and clean
them with water. After cleaning, dry the covers
thoroughly in the shade.
Cleaning the Particles Sensor
PM1.0 (ultra-fine particles) sensor detects fine
particles as well as coarse particles. Therefore,
you need to clean its lens regularly.
1
Separate the rear cover of the product.
2
Open the sensor cover.
3
Clean the lens with the cotton swab soaked
with water and clean it again with a dry cotton
swab.
NOTE
• Do not wipe the sensor with any substances
other than water. It may cause a appliance to
malfunction.
EN