Replacing The Filter - LG PuriCare 360 Clean Booster Pet Owner's Manual

MAINTENANCE
30
• If contamination cannot be eliminated after
cleaning, replace the ultra-fine filter.
3
Separate the ultra-fine filter from the total
filter.
• How to separate the ultra-fine filter: Check
the Velcro of the ultra-fine filter and carefully
remove the ultra-fine filter in order to avoid
it being damaged.
4
When you assemble the ultra-fine filter, follow
the reverse order of the separation procedure.
5
Regenerating harmful gases photocatalyst
care.
• If you want to regenerate the functions of
the photocatalyst deodorizing filter, expose
it to direct sunlight
• The filter is regenerated by the light.
• At night, expose the filter for about 3 hours
using a light to regenerate it.
• Recommended regeneration period: About
3 hours every 2 months.
CAUTION
• Do not clean the filter with water. The service life
of the filter may be reduced.
• Be careful not to damage the ultra-fine filter
when using a vacuum cleaner.
• Take caution because there is a risk of tearing or
loss when separating or assembling the ultra-
fine filter.
NOTE
• In case of the dual model, clean the bottom filter
in the same way.

Replacing the filter

1
Separate the cover from the product and
replace the filter.
• To avoid polluting the surroundings when
replacing the filter, place a newspaper on
the floor before you remove the filter.
2
Once you have replaced the filter, disable the
filter replacement alert.
Disabling the Filter Replacement
Alert
Press and hold the Speed and Indicator buttons
simultaneously for 3 seconds or more.