Olivetti DP-700 Service Manual page 35

3JX
Maintenance
item No.
Setting of amount of slack for feeding from DP
U942
Description
Adjusts the amount of slack generated when the DP is used.
Purpose
Use this mode if an original non-feed jam, oblique feed or wrinkling of original occurs when the DP is used.
Setting
1. Press the start key.
2. Select the item to be adjusted.
Display
REGST
REGST MIX
3. Press the system menu key.
4. Place an original on the DP and press the start key to make a test copy.
5. Press the system menu key.
6. Change the setting value using the +/- or numeric keys.
The greater the value, the larger the amount of slack; the smaller the value, the smaller the amount of
slack.
If an original non-feed jam or oblique feed occurs, increase the setting value. If wrinkling of original
occurs, decrease the value.
7. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking/clearing the time for the exposure lamp to light
U990
Description
Displays, clears or changes the accumulated time for the exposure lamp to light.
Purpose
To check duration of use of the exposure lamp. Also to clear the accumulated time for the lamp after replace-
ment.
Method
Press the start key. The accumulated time of illumination for the exposure lamp is displayed in minutes.
Display
CCD
CIS
Clearing
1. Select the item to be cleared.
2. Press the start key. The accumulated time is cleared.
Setting
1. Enter a accumulated time using the +/- or numeric keys.
2. Press the start key. The time is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-20
Description
Amount of slack in the reading original
from the DP
Amount of slack in the reading original
from the DP in the auto selection mode
Description
Accumulated time for the exposure lamp
Accumulated time for CIS
Service Manual
Description
Setting
range
-31 to 31
-31 to 31
Initial Change in
setting value per step
0 0.17 mm
0 0.17 mm
Y106871-5