Download Print this page
iDataLink maestro Rr Install Manual
Hide thumbs Also See for maestro Rr:

Advertisement

Quick Links

SELECT VEHICLE
PRINT PAGES NEEDED
HOW TO USE THIS INSTALL GUIDE
1
Open the Bookmarks menu and find your vehicle OR scroll
down until you find the install guide for your vehicle.
2
Print only the pages for your vehicle using the advanced
options in the Print menu.
3
Install your Maestro RR according to the guide for your vehicle.
Pressing the printer icon or "quick printing" this document will print
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in
are the properties of their respective owners.
WARNING
all of the guides in this compilation.

Advertisement

loading
Need help?

Need help?

Do you have a question about the maestro Rr and is the answer not in the manual?

Questions and answers

Summary of Contents for iDataLink maestro Rr

  • Page 1 Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.
  • Page 2 PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface Click here for: iDatalink Maestro CAM1 Dash Kit (Head Unit Adapter ready kit) Radar Installation Guides E L E C T R O N I C S PROGRAMMED FIRMWARE...
  • Page 3 Chevrolet Camaro 2010-2015 WELCOME TABLE OF CONTENTS Installation Instructions Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features.
  • Page 4 8. Remove (2) Philips screws at the rear base of the center console. (Fig. 1.8) 9. Remove the center console cover by pulling upward and Fig. 1.7 Fig. 1.8 lifting it over the parking brake. (Fig. 1.9) Fig. 1.1 Fig. 1.2 Fig. 1.9 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-CAM1-DS-IG-EN maestro.idatalink.com...
  • Page 5 6. Plug the harnesses into the aftermarket radio. Plug the data cable to the data port of the aftermarket radio. Insert the audio cable into the iDatalink 3.5mm audio jack of the aftermarket radio (labeled iDatalink. If there is no iDatalink audio input, connect to AUX).
  • Page 6 AMPLIFIER STEP 4 FACTORY RADIO HARNESS BUTTON BAR STEP 7 ACC-SP1 STEP 5 OBDII CONNECTOR OBDII OBDII MAESTRO RR MODULE AMP TURNON AMP TURNON HRR-CAM1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-CAM1-DS-IG-EN maestro.idatalink.com...
  • Page 7 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-CAM1-DS-IG-EN maestro.idatalink.com...
  • Page 8 Turns off after one minute: Normal operation. • • Normal operation (inactive). VIDEO HELP Installation, product information, vehicle specific videos. VERIFY FLASH Last flash information, steering control configuration, vehicle information. WEBLINK Software to program module. Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-CAM1-DS-IG-EN maestro.idatalink.com...
  • Page 9 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.