Britax romer EVOLVAFIX User Manual page 21

4. Stow the SecureGuard 3 in the recess 5.
5. Slide the grey removable disc 4 back into its holder.
P The grey removable disc 4 locks audibly in place.
6. Thread the harness buckle 2 through the rear slot in the
cover 1.
Do not use the slot in the cover with the spacer B.
Attach 5-point harness
1 Harness
2 Adjustment button
1. To loosen the belt 1, press the adjustment button 2 and
pull the two shoulder straps forwards at the same time.
The shoulder pads are not connected to the shoul-
der straps. If you pull on the shoulder pads, the
belt is not loosened. Only pull on the shoulder
straps.
2. Remove the two shoulder pads 3 from thecover 4 of
the backrest.
3. Close the two shoulder pads 3 with the push-buttons.
WARNING
Make sure that the shoulder straps are threaded
u
correctly through the shoulder pads.
5 Buckle tongue
6
Recess
4. Remove the buckle tongues 5 from their recess 6 on
the inside section of the buckle tongue.
5. Insert the buckle tongues 5 into the dark green
belt guides 7.
IP10199 | 1.1 | 2000038326
3 Shoulder pads
4 Cover
7 Dark green belt
guide
8
Cover
EVOLVAFIX | BRITAX RÖMER
6. Fold back the cover 8.
7. Close the press buttons of the cover 8.
Connect shoulder straps with the headrest.
1
2
1
Cover of the head-
rest
2
Shoulder straps
1. Fold down the cover of the headrest 1.
2. Loosen the push-buttons 3.
3. Place the shoulder straps 2 into the slots of the head-
rest.
4. Close the push-buttons 3.
3
3
Push-buttons
21