Britax romer EVOLVAFIX User Manual page 8

Britax Römer recommends positioning the car seats
as follows.
When using on the front seat:
Slide the front seat as far back as possible.
u
When using on the rear seat:
Slide the back seat as far back as possible.
u
Slide the front seat as far forwards as possible.
u
4.2.2 Attach insertion aids
The insertion aids simplify connecting the ISOFIX
locking arms of the child seat to the ISOFIX installa-
tion bracket on the car seat. Some vehicles already
have integrated insertion aids. Check whether your
vehicle already has the required insertion aids. If the
vehicle does not have them, Britax Römer recom-
mends using the insertion aids. These are included in
the scope of delivery of the child seat.
1 ISOFIX installation
bracket
2 Insertion aid
Clamp the two insertion aids 2, with the cut-out facing
u
up, to the ISOFIX installation bracket 1 of the car seat.
For car seats with foldable backrests, the
insertion aids 2 must be removed before folding the
backrest.
IP10199 | 1.1 | 2000038326
3
2
1
3 ISOFIX locking arms
EVOLVAFIX | BRITAX RÖMER
4.2.3 Prepare TopTether
Risk of injury from unsecured TopTether
The fastening of the child seat is guaranteed if the
TopTether is secured with an approved TopTether an-
chor point with the snap hook. Not doing this can lead to
serious or fatal injuries.
Only use anchor points approved for TopTether by
u
the vehicle manufacturer.
Never use luggage hooks to secure the TopTether.
u
Note and follow vehicle handbook.
u
Anchor points for TopTether are marked in the vehi-
u
cle with the following symbol.
WARNING
8