Table of Contents
Advertisement
CPU
1, 2, 3...
14
If you are using the C200H-CPU11-E, a SYSMAC LINK Unit or a SYSMAC LINK
Unit can be mounted to either of the two slots to the left of the CPU. They are then
connected to the CPU with the Bus Connector Unit.
1. Remove the cover from the peripheral device connector with a standard
screwdriver.
2. Connect the CPU-Mounting Programming Console to the peripheral device
connector.
3. Attach the CPU-Mounting Programming Console to the CPU by tightening
the mounting screws.
A-shape I/O Units
Section
2-2
Peripheral
device
CPU Rack
Advertisement
Table of Contents
