Advertisement
ON/OFF and Stop & Go button.
Note: The cooktop will auto turn off, if Stop & Go function last more than
10 minutes.
Using the Timer
When the cooktop is turned on, you can use the timer in following way:
• You can set it to turn either or more than one cooking zones off.
• You can set the timer for up to 24 hours.
Timer overview
Timer control
Setting the timer to turn cooking zone off
• Active the cooking zone you wish to set timer, by touching
the slider control of this cooking zone.
• Then set timer setting by touching the
• If press and hold either of the two buttons, the
value will adjust down or up rapidly in circle.
4. When the timer is set, it will begin to count down immediately, the display
will show the remaining time.
5. When cooking timer expires, the timer display LED shows "----", the
corresponding cooking zone will be switch off automatically.
Note: The default setting of minute reminder and timer is 30 minutes.
Note: After adjusting, the setting in timer indicator will flashing for 5 seconds
and then stop flashing, then the setting be confirmed.
or
17
Timer display LED
shows the number
of hours & minutes
button.
Advertisement
