Advertisement
Rubber Feet
IWHL7320SC has rubber feet. There are 4pcs feet and 4pcs screws have been
assembled on the hob in factory.
Connecting the cooktop to the mains power supply
The power supply should be connected in compliance with the relevant
standard, or a single-pole circuit breaker. The appliance has a large power
rating and must be connected to electricity by a Qualified Electrician.
Notes:
1. If the cable is damaged or needs replacing, this should be done by an after-
sales technician using the proper tools, so as to avoid any accidents.
2. If the appliance is being connected directly to the mains supply, an omni
polar circuit breaker must be installed with a minimum gap of 3mm between
the contacts.
3. The installer must ensure that the correct electrical connection has been
made and that it complies with safety regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by qualified
technician.
Cautions
1. The cooktop must be installed by qualified personnel or technicians.
Please never conduct the operation by yourself.
2. The electric cooktop shall not be mounted to cooling equipment, dishwashers
and rotary dryers.
3. The electric cooktop shall be installed such that better heat radiation can be
ensured to enhance its reliability.
8
Advertisement
