Advertisement
4. The wall and induced heating zone above the work surface shall withstand
heat.
5. To avoid any damage, the sandwich layer and adhesive must be heat
resistant.
6. A steam cleaner is not to be used.
7. This electric cooktop can be connected only to a supply with system
impedance no more than 0.427 ohm. In case necessary, please consult your
supply authority for system impedance information.
Note: For IWHL7320SC applied with a power cord with plug. If so, you
can directly plug in socket. Please keep power cord plug out after use.
For model IWHH7320SH, power cord without plug, the method of
connections shown below.
9
Advertisement
