Advertisement
•You can adjust heat setting from 0-12 by touching
the slider control.
Notes:
1. After connect to electricity, when power on, the buzzer of cooktop beeps
once, all indicators light up for 1 second then go out.
2. When the cooktop in Standby mode, if there is no practice within 1 minute,
the electric cooktop will auto turn off, with buzzer beeps once.
3. To turn on cooktop, press the ON/OFF control button and hold on for about 3
seconds; To turn it off, just need to press ON/OFF button again.
4. The power level can be adjusted from 0 to 12, default setting is level 5.
5. The heat setting indicator of the selected zone flashing when adjusting.
After adjusting, the number flashing for 5 seconds then stop flashing,
then the setting is confirmed.
To turn off cooktop
1. You can turn the cooking zone off by adjust heat setting to
level 0, which the power level display LED shows "--".
2. You can also turn the whole cooktop off by touching the
ON/OFF
control button.
Note: If there is power cut off during cooking, all setting will be cancelled.
Note: The cooling fan of induction cooktop will remain on for about 1 minute
after the cooktop be turned off.
Power Sharing Management
Your hob is with power management function, this function will limit total power
within 4400W (IWHH7320SH) & 2800W
zones working together and total power reach 4400W/2800W, if you want to
increase power level of a cooking zone, the programmer will auto turn down
power level of the other cooking zone to keep total power within this setting.
Using Stir-fry-Induction Cooktop
IWHL7320SC, IWHH7320SH have Stir-fry function, which could switch
cooking zone to maximum power level, to reduce your cooking time.
To active Stir-fry function when cooktop is working, please follows below:
1. Directly touch Stir-fry function button
use.
Notes:
1. By single touch Stir-fry function button, the cooktop works at maximum
(
IWHL7320SC). When 2 cooking
of the cooking zone you wish to
14
Advertisement
