BWI Eagle 36-40100-AC Product Information Bulletin

AIR-EAGLE
2.4 GHz RF Transceiver
MODEL 36-40100-AC
DESCRIPTION
The A -E SR PLUS TRX is an R.F. transceiver capable of
IR AGLE
transmitting and receiving commands from up to 600 feet away. This
model comes equipped with one dry contact input and one 5amp relay
output. When combined with another transceiver this allows the user to
transmit information out and receive a confirming signal back that the
operation was performed. This unit has eight user-selectable network
frequencies to allow multiple systems to operate simultaneously in the
same area without interference.
APPROVALS
United States (FCC)
Canada (IC)
Europe (CE)
INSTALLATION
DISCONNECT Power from all equipment before installation.
1. Mount the transceiver in a convenient location.
2. Install control wiring to terminal strip.
3. Install antenna onto antenna connector located on the right side on
the enclosure.
4. Connect supplied power input cable to your external power source.
TERMINAL STRIP WIRING
TER 3
DRY CONTACT INPUT RELAY OUTPUT
1 Input 1 C 1
2 Input 1 2
3
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
®
SR PLUS
MCQ-XBEE3
1846A-XBEE3
ETSI
TER 2 TER 1
AC/DC POWER INPUT
N/O 1 100-250 VAC
C (common) 2 100-250 VAC
N/C 3 Ground
PRODUCT INFORMATION
BULLETIN
Dimensions (with mounting plate) 7.07L x 3.57W x 1.62H
CONTROLS AND INDICATORS
Power – LED1
Illuminates green when unit is powered
TX – LED2
Illuminates red when unit is transmitting
Relay – LED3
Illuminates green when relay is energized
RF module that sends data to the remote
RF1
receiver
Seven dip switches for selecting options and
SEL1
network frequency
TER3 Dry contact input
TER2 Relay output
TER1 Power Input