Table of Contents
Advertisement
4
System settings
4.1 Calling up the Tutorial
The Tutorial provides information and explanations on different sections concerning embroidering.
> Touch the icon «Home».
> Touch the icon «Tutorial».
> Select the desired topic to get information.
4.2 Calling up the embroidery consultant
The Embroidery Consultant informs you about decision support for embroidery projects. After entering the
desired embroidery project and the fabric, suggestions for the suitable needle and the suitable embroidery
foot are displayed.
Prerequisite:
•
Embroidery mode is active.
> Touch the icon «Home».
> Touch the icon «Embroidery consultant».
> Select the embroidering project.
> Select the fabric on which you want to embroider.
> Touch the icon «Confirm».
–
If an embroidery motif has already been selected, a warning appears stating that this will be
overwritten.
4.3 Using eco mode
For a longer work stoppage, the machine can be put into energy-saving mode.
> Touch the icon «Home».
> Touch the icon «eco mode».
– The display goes to sleep. The power consumption is reduced and the sewing light is off.
> To exit energy-saving mode, touch the eco symbol on the display.
–
The machine is ready for use.
4.4 Calling up the Help
> Touch the window in the display where help is needed.
> Touch the icon «Help» to start the help mode.
> Touch the icon in the display where help is needed.
–
Assistance concerning the selected icon is displayed.
System settings
65
Advertisement
Table of Contents
