Dometic DM50NTED Installation And Operating Manual page 20

Installation DM 50NTE D, DM 50NTE F
DM50NTE D only:
1. Remove the two plugs (C 1) from the screws (C 2) of the door handle (C 3).
2. Unscrew the two screws (C 2) of the door handle.
3. Remove the door handle (C 3).
4. Remove the gasket.
5. Remove the lock cover.
Drilling the holes (fig. a, page 8)
1. Drill a hole (A 1) with a diameter of 23.6 mm (0.9 in) through the decor (only
DM50NTE D) and the door.
2. Unscrew the twelve screws (B 1) of the decor frame (B 2) (only DM50NTE D).
3. Remove the decor frame (only DM50NTE D).
Assembling the lock (fig. b, page 9)
1. Put the new lock cover (A 1) into place.
2. Put the decor (B 1) into the decor frame.
3. Screw (B 2) the decor frame (B 3) onto the door.
4. Install the door lock (C 1).
5. Install the lock catch (D 1) in the cabinet.
Assembling the drawer (fig. c, page 9)
1. Push the gasket (1) on the decor frame (2).
2. Screw the door handle (4) onto the door.
3. Push the plugs (3) on the screws of the door handle (4).
4. Push the drawer into the cabinet.
20
EN