Summary of Contents for Middle Atlantic Products DS-600SP-AL
Page 1
Instruction Sheet Display Station Series DS-600SP-AL LISTED THANK YOU Thank you for purchasing the DS-600SP-AL Please read these instructions thoroughly before installing this product. I-00718 Rev E...
Page 2
IMPORTANT SAFETY INSTRUCTIONS / INSTRUCTIONS IMPORTAANTES SUR LA SÉCURITÉ DANGER HAZARDOUS VOLTAGE/DANGER HAUTE TENSION CAUTION! To avoid an unstable condition, place heavier The lightning flash with the arrowhead symbol, within an equilateral components at the bottom of the cabinet. When more than triangle is intended to alert the user to the presence of uninsulated one component is placed in the cabinet, begin at the dangerous voltage within the product’s enclosure that may be of...
Page 3
IMPORTANT SAFETY INSTRUCTIONS When using an electrical furnishing, basic precautions should always be followed, including the following: • For institutional use. • Read and follow all instructions before using. • Save all instructions. •. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Page 4
INSTRUCTIONS IMPORTAANTES SUR LA SÉCURITÉ Lorsque vous utilisez des mobiliers électriques, toujours respecter les précautions de base, notamment : • Usage institutionnel. • Lire et suivre toutes les instructions avant l'utilisation du matériel. • Conserver toutes les instructions. • Confier toutes les réparations à un personnel qualifié. Une réparation s'impose lorsque l'appareil a été endommagé d'une manière quelconque, par exemple en cas d'endommagement du cordon d'alimentation ou de sa fiche, de renversement de liquide ou de chute d'objets à...
Page 5
WEIGHT RATINGS ITEM DETAILS 125 lbs. (56.6 kg) Maximum Display (37” to 70”) Total Rated Load 150 lbs. (68 kg) Maximum SPECIFICATIONS ITEM DETAILS Power Strip Maximum Load 12 Amp 1500 Watts @ 125 VAC DISPLAY MAXIMUM: 125 LBS (56.6 KG); 37”...
TABLE OF CONTENTS ..................Important Safety Instructions 2 - 4 ..................Weight Ratings/Specifications ..................Hardware/Items Supplied 6 - 7 ....................Assembling The Base ............Separating The Universal Plate And The Support Bracket ..................Installing The Universal Plate ..................Installing The Adapter Brackets ............
ASSEMBLING THE BASE 1. Lift the steel base by grasping the cable ties. Peel off the backing paper and stick the rubber pads on the base. 2. Attach the connecting plate to the column. Tighten all screws with provided hex key. 3.
SEPARATING THE UNIVERSAL PLATE AND THE SUPPORT BRACKET 1. Loosen and remove the nuts in order to separate the universal plate from the universal plate assembly. Universal Plate Support Plate Page 9...
INSTALLING THE UNIVERSAL PLATE 1. Slide the adapter brackets into the universal plate. 2. Insert the stopper bolts into both ends of the universal plate to prevent the adapter brackets from slipping off. 3. Attach both plastic caps to the ends of the universal plate. Tighten all screws INSTALLING THE ADAPTER BRACKETS 1.
INSTALLING THE VESA 200 ADAPTER PLATE (WHERE APPLICABLE) 1. Attach the adapter plate to the back of your display. 2. Attach adapter plate to adapter brackets as shown. 3. Tighten all screws and nuts. 8th hole from top. Page 11...
MOUNTING THE SCREEN Selecting The Mounting Hardware To Attach Brackets To Flat Panel 1. Identify the correct diameter screw for the flat panel threaded inserts. The correct screws should thread easily and not pull out when tension is applied. Mark 1/8” Above Depth 2.
RECESSED BACK SCREENS OR TO ACCESS A/V INPUTS NOTE: Choose the appropriate screws, washers and spacers (if necessary) according to the type of display. 1. Position the adapter brackets as close as possible to the center of the display. 2. Screw the adapter brackets onto the display 3.
HOOKING THE DISPLAY ONTO THE SUPPORT PLATE 1. Insert support plate along column rails to the required position and tighten all screws with hex key. NOTE: The support plate has an arrow on the side of it. Install with the arrow facing up. 2.
Page 16
LANDSCAPE / PORTRAIT ADJUSTMENT 1. Either rotate the display clockwise and use the screw to secure the display, or, adjust the display tilt to desired position. Page 16...
Voice: 613-836-2501 - Fax: 613-836-2690 / www.middleatlantic.ca - customerservicecanada@middleatlantic.ca Factory Distribution USA: NJ - CA - IL Canada: ON - BC At Middle Atlantic Products we are always listening. Your comments are welcome. Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company. Page 17...