Danfoss iC7 Series Installation Manual page 4

Multiwire Kit for Fx09-Fx10
Installation Guide
d. Tighten the cable gland.
1
Illustration 2: Installation of 2
rd
4.
Install the 3 cable:
- a. Attach the lug to the cable.
b.
- Using 1 M10x60 screw, place 1 M10 washer, the 3
Place the items on the screw in the order listed. Check that the washer is on top of the lug, and the spacer is
below the lug. See
- c. Guide the assembled screw through the holes in the 2
d.
- Tighten the screw.
-
4 | Danfoss A/S © 2022.10
nd
Cable
Illustration 3.
2
rd
lug, and 1 spacer onto the screw.
nd
lug, the terminal busbar, and the 1
Installation
st
lug.
AN428032702374en-000101 / 136R0316