Residual Risks - Black & Decker REVHD12C Original Instructions Manual

@
Additional power tool safety warnings
Warning! Additional Safety Warnings for Drill/
Driver/ Hammerdrill.
● Use clamps or other practical way to secure and support
the workpiece to a stable platform. Holding the work by
hand or against your body is unstable and may lead to
loss of control.
● Accessories and tool may get hot during operation. Wear
gloves when handling them if performing heat producing
applications such as drilling metals.
● Air vents often cover moving parts and should be avoided.
Loose clothes, jewelry or long hair can be caught in
moving parts.
● Wear safety goggles or other eye protection. Hammering
and drilling operations cause chips to fly. Flying particles
can cause permanent eye damage.
● Wear ear protectors when impact drilling. Exposure to
noise can cause hearing loss.
● Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
● Do not operate this tool for long periods of time. Vibration
caused by tool action may be harmful to your hands
and arms. Use gloves to provide extra cushion and limit
exposure by taking frequent rest periods.
Safety instructions when using long drill bits
Never operate at higher speed than the maximum
u
speed rating of the drill bit. At,higher speeds, the bit is
likely to bend if allowed to rotate freely without contacting
the workpiece, resulting in personal injury.
Always start drilling at low speed and with the bit
u
tip in contact with the workpiece. At higher speeds,
the bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
Apply pressure only in direct line with the bit and do
u
not apply excessive pressure. Bits can bend causing
breakage or loss of control, resulting in personal
injury.
Safety of others
This tool is not intended for use by persons (including
u
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
u
play with the appliance.

Residual risks

Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
(Original instructions)
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any rotating/moving parts.
u
Injuries caused when changing any parts, blades or
u
accessories.
Injuries caused by prolonged use of a tool. When using
u
any tool for prolonged periods ensure you take regular
breaks.
Impairment of hearing.
u
Health hazards caused by breathing dust developed when
u
using your tool (example:- working with wood, especially
oak, beech and MDF.)
Labels on tool
The following pictograms along with the date code are shown
:
on the tool:
Warning! To reduce the risk of injury, the user
must read the instruction manual.
Do not stare at operating lamp
Important safety instructions for all integral battery
tools
Warning! Read all safety warnings, instructions, and
cautionary markings for the battery, charger and product.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Never force a charger plug into the tool.
u
DO NOT modify the charger plug of a non-compatible
u
charger in any way to fit into the tool as the battery may
rupture causing serious personal injury.
DO NOT charge or use the battery in explosive atmos-
u
pheres, such as in the presence of flammable liquids,
gases or dust.
Inserting or removing the charger plug from the tool may
ignite the dust or fumes.
Only charge the battery with the provided charge lead and
u
a suitable class 2 power supply.
DO NOT splash or immerse in water.
u
DO NOT allow water or any liquid to enter tool.
u
DO NOT store or use the tool in locations where the
u
temperature may reach or exceed 104 °F (40 °C) (such as
outside sheds or metal buildings in summer). For best life
store tools in a cool, dry location.
Do not store the tool with the switch locked on. Never tape
u
the switch in the ON position.
DO NOT incinerate the tool even if it is severely damaged
u
ENGLISH
5