Black & Decker REVOS12C Manual
Hide thumbs Also See for REVOS12C:


Quick Links



Table of Contents

Summary of Contents for Black & Decker REVOS12C

  • Page 1 REVOS12C
  • Page 3: Intended Use

    Intended use Your BLACK+DECKER REVOS12C oscillating tool has been designed for DIY applications such as sanding operations. It is also suitable for cutting wooden materials, plastic, gypsum, non-ferrous metals and fastening elements (e.g., unhardened nails, staples), working soft wall tiles and scraping of small surfaces.
  • Page 4 f. If operating a power tool in a damp location is c. Disconnect the plug from the power source and/or unavoidable, use a residual current device (RCD) remove the battery pack, if detachable, from the power protected supply. Use of an RCD reduces the risk of tool before making any adjustments, changing accessories, or storing power tools.
  • Page 5 (Original instructions) ENGLISH e. Do not use a battery pack or tool that is damaged or Dispose of dust particles and any other modified. Damaged or modified batteries may exhibit debris safely. unpredictable behaviour resulting in fire, explosion or risk The intended use is described in this instruction manual.
  • Page 6 ENGLISH (Original instructions) When assessing vibration exposure to determine safety Do not use a tool or charger that has received a sharp measures required by 2002/44/EC to protect persons regularly blow, been dropped, run over or damaged in any way using power tools in employment, an estimation of vibration (e.g., pierced with a nail, hit with a hammer, stepped on).
  • Page 7 (Original instructions) ENGLISH Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual The charger is intended for indoor use only. risks can not be avoided. These include: Injuries caused by touching any rotating/moving parts. Read the instruction manual before use.
  • Page 8 ENGLISH (Original instructions) Note: The charger will not charge a battery if the cell Segmented saw blade. temperature is below approximately 10 °C or above 40 °C. (Part number - STA26120-XJ) The integral battery should be left connected to the charger Long life blade which is ideal for and the charger will begin to charge automatically when the cutting wood, plastics, thin walled...
  • Page 9: Hints For Optimum Use

    Do not exert too much pressure on the tool. Always use the appropriate type of attachment for the Technical data workpiece material and type of cut. REVOS12C Regularly check the condition of accessories. Replace when necessary. Voltage 10.8V (12V max) Mark the desired starting point.
  • Page 10: Ec Declaration Of Conformity

    MACHINERY DIRECTIVE Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) Cordless Oscillating Tool - REVOS12C 810 Whitehorse Road Box Hill VIC 3128, Australia BLACK+DECKER declares that these products described under "technical data" are in compliance with:...
  • Page 12 NA133784 04/2022...

Table of Contents