Black & Decker RS1050E Original Instructions Manual

Hand-held saw




Table of Contents

Summary of Contents for Black & Decker RS1050E

  • Page 1 RS1050E
  • Page 2 English (Original instructions)
  • Page 5: Intended Use

    Intended use If operating a power tool in a damp location is unavoidable, use a Residual Current Device (RCD) Your Black & Decker hand-held saw has been designed for protected supply. Use of an RCD reduces the risk of sawing wood, plastics and sheet metal. This tool is intended electric shock.
  • Page 6 d. Store idle power tools out of the reach of children Do not touch the workpiece or the blade  immediately after operating the tool. They can and do not allow persons unfamiliar with the power become very hot. tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained Be aware of hidden hazards, before cutting into ...
  • Page 7 tool is switched off and when it is running idle in addition to Make sure that the handle (3) and strap indexing features  the trigger time. (7) are fully engaged in the matching saw positions. Hook the clamp and strap together and press the clamp ...
  • Page 8: Maintenance

    Let the blade run freely for a few seconds before starting Make the cut close to the main branch or tree body.   the cut. Vertical cutting Apply only a gentle pressure to the tool while performing  The tool allows close cutting to corners and other difficult the cut.
  • Page 9: Protecting The Environment

    Internet at: is in addition to and in no way prejudices your statutory Technical data rights. The guarantee is valid within the territories of the RS1050E TYPE 1 Member States of the European Union and the European Voltage Vac 230 Free Trade Area.
  • Page 10 check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after- sales service and contacts are available on the Internet at: Please visit our website to...
  • Page 11 RS1050E E15156 01-08-07...
  • Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...

Table of Contents