Caller Id - D-Link DVG-6004S User Manual

DVG-6004S User's Manual

3-2-5 Caller ID

General Settings → Caller ID
FXO Caller ID Detection: Used to detect the Caller ID delivered from the PSTN to the FXO port. When
enabled, the Caller ID detected on the FXO port will be sent to the SIP Proxy Server on transit in (dialing out)
calls.
Detection Level: If FXO can't detect Caller ID, try to adjust it until DVG can caller ID.
FSK Caller ID Type: Either Bellcore, ETSI or NTT could be selected.
33
VoIP Gateway Configuration